Bi-directional Static Load Test is truly an innovative static load testing technique. It is the only load test that provides separate measurement of a pile’s end bearing and skin friction.

High Strain Dynamic Pile Testing
“Quick, cost saving and reliable. You save time, money and gain quality assurance”

High strain dynamic pile test is perform using Pile Driving Analyzer (PDA) together with strain sensors and accelerometers.

Case Pile Wave Analysis Program(CAPWAP)
“CAPWAP maximizes the benefits of PDA results”

CAPWAP (Case Pile Wave Analysis Program) is a rigorous numerical analysis, which models the pile and soil behaviour that allows full and accurate analysis of PDA field data.

Low Strain Pile Integrity Testing
“Pile Integrity Tester makes it economically feasible to verify the integrity of every pile on your site”

Pile Integrity Tester (PIT), also known as Sonic Echo or Pulse Echo methods, is used for the low strain integrity testing. The PIT may be used for auger cast-in-place piles, bored shafts, driven concrete piles and concrete filled pipes.

Cross-Hole Sonic Logging
“Cross-Hole Analyzer, for reliable cross-hole sonic logging and improved quality assurance of concrete foundation”

Cross-Hole Analyzer (CHA) is used to determine the quality and consistency of the concrete of bored piles. Selected bored pile is installed with steel tubes that span the whole axial length and cast.

3D Tomosonic
“Refining CSL data presentation with 3-D images will vastly improve concrete pier integrity characterization”

TomoSonic is a 3-D tomography imaging tool that supplements the CHA output. This analysis is useful in cases where CHA-W analysis reveals a defect but does not give a precise idea of its extent.

Noise and Vibration Monitoring

We own and operate the Instantel’s Minimate Plus and Quest’s Dosimeter for environmental monitoring in the construction industry. We are enabled to carry out monitoring of vibration and noise level, resulted from a specific activity nearby at the concerned location

Bored Pile Instrumentation

We also carry out plate bearing test and ring shear test for caisson pile for the determination of the stiffness of the soil at the toe and unit skin friction at different levels of the caisson pile.

Plate Bearing Test & Ring Shear Test

We also carry out plate bearing test and ring shear test for caisson pile for the determination of the stiffness of the soil at the toe and unit skin friction at different levels of the caisson pile.